10th International Conference on Appropriate Technology (10th ICAT)

November 22-25, 2022
Khartoum, Sudan

Enhancing Peace and Governance through Appropriate Technology:
Reimagining Sustainable Community Wellbeing in an Era of Global Climate Change

The conference is hosted by the University of Khartoum (UofK) and co-hosted by Sudan University of Science &Technology (SUST)

Update 5 December 2022: Download the extended post-conference programme.

Registration Speakers Workshops Sponsors Organizers Scientific Review Committee Programme

10th ICAT Proceedings

Registration for the 10th ICAT

Registration for the 10th ICAT is now open!

NOTE: You will need to submit proof of your registration payment along with your registration form.
Please view registration fees and instructions using the "List of Registration Fees" button below.

Step 1: List of Registration Fees Step 2: Register for the 10th ICAT

Visa Information Hotel Information

**Please note that Early Registration (10% discount) lasts until the end of September, followed by a normal registration period from 1st - 21st October (full registration fees). and for registrations after 21st October there is an additional 10%.**

10th ICAT Scientific Review Committee

#	PC Member	Organization	Country
1	Aamir Dean	Sudan University of Science and Technology	Sudan
2	Akram Elkhalifa	University of Khartoum	Sudan
3	Amged Abdelatif	University of Khartoum	Sudan
4	Amira Osman	Tshwane University of Technology	South Africa
5	Ammar Babiker	Sudan University of Science and Technology	Sudan
6	Anas Showk	University of Khartoum	Sudan
7	Arig Bakhiet	Sudan National Energy Research Centre	Sudan
8	Brian Stephenson	Qodesh Engineering	USA
9	Charles Verharen	Howard University	USA
10	Christopher Papadopoulos	University of Puerto Rico, Mayagüez	Puerto Rico
11	Corinthias P. M. Sianipar	Kyoto University	Japan
12	Eitimad Ahmed	Waves Eng. Co. Ltd / Arab Open University, Sudan	Sudan
13	Excellent Chireshe	Great Zimbabwe University	Zimbabwe
14	Fatima Salaheldin Mohamad Ali	Sudanese Knowledge Society	Sudan
15	Gada Kadoda	Sudanese Knowledge Society	Sudan
16	Gamal Hamid	University of Khartoum	Sudan
17	Ibrahim Zakaria	University of Khartoum	Sudan
18	Ilesanmi Daniyan	Tshwane University of Technology	South Africa
19	Iman Abdelrahman	University of Khartoum	Sudan
20	Jephias Gwamuri	Michigan Technological University	USA
21	John Tharakan	Howard University	USA
22	John Trimble	Tshwane University of Technology	South Africa
23	Joseph Thomas	Indian Institute of Technology, Madras	India
24	Kelvin Willoughby	HHL Leipzig Graduate School of Management	Germany
25	Khumbulani Mpofu	Tshwane University of Technology	South Africa
26	Malathe Gamal Mahmoud Hamid	University of Khartoum	Sudan
27	Mammo Muchie	Tshwane University of Technology	South Africa
28	Marcel Castro-Sitiriche	University of Puerto Rico - Mayagüez	Puerto Rico
29	Marwan Adam	Sudanese Knowledge Society	Sudan
30	Mohamed Chouikha	Prairie View A&M University	USA
31	Muna Eltahir	Omdurman Islamic University	Sudan
32	Ogundiran Soumonni	Wits University	South Africa
33	Olukorede Adenuga	Tshwane University of Technology	South Africa
34	Rami Zeinelabdein	University of Nottingham	UK
35	Rofaida El Zubair	Sudanese Knowledge Society	Sudan
36	Safa Mohammed	DAL Food	Sudan
37	Sahl Yasin	Sudanese Knowledge Society	Sudan
38	Tanzeil Hashim	Alchemy for Trading and Services Co. Ltd.	Sudan
39	Taurai Mutanda	Mangosuthu University of Technology	South Africa
40	Thierry Yonga	Tshwane University of Technology	South Africa
41	Xavier Poshiwa	Great Zimbabwe University	Zimbabwe

TABLES OF ORGANIZERS & SUPPORT TEAMS

International Organizing Committee (IOC) – All are INAT Members

#	Name	Organization	Country
1	Brian Stephenson	Passion of Hope International	USA
2	Cadena Bedney	Independent Consultant	USA
3	Charles Verharen	Howard University	USA
4	Diran Soumonni	University of the Witwatersrand	South Africa
5	Gada Kadoda	Sudanese Knowledge Society	Sudan
6	Hattie Carwell	Museum of African American Technology (MAAT) Science Village	USA
7	Ilesanmi Daniyan	Tshwane University of Technology	South Africa
8	Jephias Gwamuri	National University of Technology/Great Zimbabwe University	Zimbabwe
9	Jesse Bemley	Joint Educational Facilities	USA
10	John Tharakan	Howard University	USA
11	John Trimble	Tshwane University of Technology	South Africa
12	Khumbulani Mpofu	Tshwane University of Technology	South Africa
13	Mammo Muchie	Tshwane University of Technology	South Africa
14	Marcel J. Castro-Sitiriche	University of Puerto Rico	Puerto Rico
15	Mjumbe Poe	University of Pennsylvania	USA
16	Olukorede Adenuga	Tshwane University of Technology	South Africa
17	Taurai Mutanda	Mangosuthu University of Technology	South Africa
18	Thierry Yonga Chuengwa	Tshwane University of Technology	South Africa

IOC Support – Conference Webpage Development and Administration

Nada Mahmoud

Sudanese Knowledge Society

Sudan

Local Organizing Committee (LOC) – All are from University of Khartoum and Sudan University of Science and Technology

#	Name	University
1	Aamir Dean	Sudan University of Science and Technology
2	Akram A. Elkhalifa	University of Khartoum
3	Alla Isam Khidir	University of Khartoum
4	Alnema B. K. Eltom	University of Khartoum
5	Amel Bakhiet	Sudan University of Science and Technology
6	Amged O. Abdelatif	University of Khartoum
7	Aya A. Abdalrahman	University of Khartoum
8	Safa Suliman	University of Khartoum
9	Sahl Yasin	Sudan University of Science and Technology
10	Shaza M. H. Mohammed	University of Khartoum
11	Yousif J. A. Osman	Sudan University of Science and Technology
12	Zeinb Y. A. Mohamed	Sudan University of Science and Technology

LOC Support Teams – All are from University of Khartoum

#	Name	Team
1	Abubaker O. A. Obaid	Media Team
2	Ahmed S. M. Elrayah	Media Team
3	Amna M. K. Elamin	Communication Team
4	Ayman O. E. Taha	Media Team
5	Dahlia M. B. Elgali	Media Team
6	Eilaf A. M. Hamdan	Media Team
7	Marwa K. A. Abbas	Media Team
8	Marwan M. E. H. Mohammed	Media Team
9	Mirametta Botrous	Communication Team
10	Mohammed Elkamel Mohammed	Media Team
11	Walaa M. O. Ahmed	Communication Team

Enhancing Peace and Governance through Appropriate Technology: Reimagining Sustainable Community Wellbeing in an Era of Global Climate Change

Background

War and conflict seem to be endemic in many parts of the world, especially in Africa. This is often related to deep-rooted injustice, unequal development, and lack of good governance. Many people still lack access to clean water, sanitation, energy, reliable food and nutrition, healthcare, education, safe transportation, information and communication, and are also suffering the consequences of climate change. People are engaged in scientific research and development to address these problems, while pertinent indigenous knowledge also exists. In sum, this represents the transfer of knowledge for achieving community wellbeing. The 10th ICAT will focus on the dissemination of diverse experiences among motivated actors from a wide cross-section of society, exploring new frontiers and challenges from across the broad, interdisciplinary, diverse scope of Appropriate Technology, contributing to achieving a more equitable, sustainable, just and peaceful global community.

10th ICAT Keynote Speakers

Dr. Mohamed Abdelrahman Hassan is a writer, critic and graphic designer. He is as associate professor of criticism and human sciences in the College of Fine Art and Design at Al-Neelain University- Sudan. His work focuses on decoloniality of modern knowledge, and critique of modernity. Dr. Hassan’s most recent published book is Critique of the (Global) South Thought (2022).

Dr. Myron N.V. Williams is an Associate Professor of Chemistry, at Clark Atlanta University, Atlanta, GA, USA. In 1980, he earned a B.S. in Microbiology (magna cum laude), at Howard University, Washington, DC, and went on to complete a Ph.D. in Biology at the Massachusetts Institute of Technology, Cambridge, MA in 1989. He worked as a postdoctoral fellow at the International Centre for Genetic Engineering and Biotechnology in New Delhi, India, and at the University of Georgia at Athens. He has held appointments as Adjunct Professor at the Winship Cancer Center at Emory University, and Mid-Career NHGRI Fellow at The Molecular Science Institute in Berkeley California.

Dr. Williams has been a Fulbright Fellow at the Institut International d' Ingénierie de l' Eau et de l' Environment (2iE) in Ouagadougou, Burkina Faso, and at the Kwame Nkrumah University of Science and Technology, Kumasi, Ghana during the 2021-22 academic year. Current research interests include appropriate technologies for improving biofuel production, waste disposal, climate smart agriculture, and use of low cost and local resources for education and industrial development in marginalized communities.

Williams has been a member of the American Association for the Advancement of Science (AAAS) for more than 30 years, and has held membership of at least 10 other scientific and educational societies.

Mr. Deepak Gadhia is a leading technocrat and a pioneer in the field of Solar and Renewable Energy as well as Bio Gasification, and has earned international recognition for his accomplishments over the last 40 years. He started his career with Wacker Chemie GMBH in Germany but moved to India where he developed a number of world-renowned renewable energy projects.

Among his notable accomplishments are:

Instrumental for the development of the first solar steam cooking system in India.
Installed the worlds’ largest steam cooking system, producing up to 50,000 meals per day.
Installed the highest altitude steam cooking system in Ladakh, producing 500 meals per day in -40°C temperature conditions for the Indian Army.
Installed the largest solar powered air-conditioning system (100-ton system) for the Kailash Cancer Hospital, in Goraj India.
Developed a 600m3 and 1000m3 BioGas system generating Compressed Natural Gas (CNG).
Recognized by the Clinton Global Initiative Foundation for outstanding work in the areas of renewable energy and recipient of many national and international awards.

He is a popular speaker at International as well as National meetings and conferences on solar power, solar cooking, social techno-preneurship, community upliftment and sits on the board of advisors for a number of organizations including Solar Cooking International. Mr. Gadhia heads the solutions team and is Mentor to many start-ups under UNIDO CleanTech Global Cleantech Innovation Program (GCIP). He is a Director of MSA Renewtech Foundation, a social enterprise focused on renewable energy consultancy and whose Profits goes to Muni Seva Ashram, an NGO in which he is a Trustee. He is promoter and Chairman of Sunrise CSP India Pvt. Ltd., a 100% subsidiary of CSP Sunrise based in Australia active in solar based Thermal and Power applications including desalination projects globally.

Mr. Deepak Gadhia holds a degree in “Process and Environmental Engineering” from TFH Berlin, and has obtained his Post Graduate Degree from TU Berlin, Germany & MIT of USA.

For more Information

Dr. Lilia A. Abron, P.E., BCEE, the CEO/President and Founder of PEER Consultants, P.C. (PEER) is a trailblazer, a History Maker™, an entrepreneur. She is the first African-American woman in the nation to earn a Ph.D. in Chemical Engineering and the first African-American to start an engineering consulting firm focused on the environment and its environmental issues. To help advance the condition of the impoverished sector worldwide using sustainability measures, Lilia also founded PEER Africa Western Cape, CC in 1995.

PEER is a 44-year-old, full-service environmental and civil engineering consulting firm. In 1978, PEER was established under Dr. Abron's belief that humans and the physical environment are fully compatible and co-exist to mutually benefit one another. With headquarters in Washington, DC and additional offices in Baltimore, MD, Burlington, MA, and Clearwater, FL, PEER is strategically located to serve its clients throughout the U.S. Since 1978, the firm is focused on providing transformative, appropriate, and sustainable solutions for its clients’ challenging environmental problems. Through our focus areas – Water Engineering & Sciences; Environmental Management; Energy Efficiency, Renewable Energy (EERE), Sustainability, & Resiliency – PEER provides professional services for the enhancement, maintenance, and restoration of the natural and built environments.

In 1966, Dr. Abron graduated with a B.S. degree in Chemistry from Lemoyne College in Memphis, TN, with Distinction. In 1968, she earned her M.S. degree in Environmental and Sanitary Engineering from Washington University in St. Louis. In 1972, Dr. Abron obtained her Ph.D. in Chemical Engineering from the University of Iowa.

Most recently, Dr. Abron has been inducted to the prestigious National Academy of Engineering (NAE) - election to the National Academy of Engineering is among the highest professional distinctions accorded to an engineer.  Dr. Abron has also been inducted into the notable American Academy of Arts & Sciences, and Tau Beta Pi, DC Alpha Chapter as an Eminent Engineer. She is also a member of the International Women’s Forum; Delta Sigma Theta, a social services sorority. She serves on the advisory boards of: College of Engineering, City College of New York; School of Engineering and Applied Sciences/ SEAS, Environmental and Energy Management Institute, both at George Washington University; Department of Energy, Environmental and Chemical Engineering, Washington University, St. Louis, Board of Trustees; LeMoyne-Owen College, Memphis, TN; and, President-Elect, The American Academy of Environmental Engineers and Scientists.

She is a proud resident of the District of Columbia, a District-registered Professional Engineer (P.E.), and a Board-Certified Environmental Engineer (BCEE).

Ms. Sushma Patel is a South African registered professional architect, urban designer, lecturer and researcher.

Sushma has a particular interest in the spatial fragmentation of South African cities and the need for increased density and integration close to the inner city. Her Masters in Urban Design dissertation and current Doctorate of Architecture proposal centres around these themes. She is also a published researcher in the field of the ‘urban laboratory’, a research field identified within the Department of Architecture and Industrial Design at the Tshwane University of Technology where she teaches. She is the head of Architectural Design 5, teaches Building Physics and Systems Design 4 and currently is the head of post graduate studies in the Department. She has been involved with many conferences locally and abroad.

Sushma teaches full time at the Tshwane University of Technology. She has a Bachelor of Architecture (1997) and a Master of Urban Design (2017) degree, both from the University of the Witwatersrand, Johannesburg. As a student, Sushma participated in an exchange programme between the University of the Witwatersrand and the Academie van Bouwkunst in Rotterdam, the Netherlands. She has experience in working at several Dutch architectural practices as a stagiaire, including briefly at the office of Rem Koolhaas, OMA in 1996.

Since graduating as an architect, she acquired 16 years of practice experience mainly in Cape Town, South Africa, during the period 1998-2012. She has worked with prominent architects Jo Noero, Heinrich Wolff, Aaron Wegmann and Luyanda Mpahlwa on socially significant buildings. During her time at ACG Architects, she worked on many social housing projects. She has contributed to the winning and built design of an architectural competition ‘10x10’, a low-cost housing scheme in Mitchell’s Plain by MMA Architects.

Sushma has gained insight into the policies and workings of state institutions while working at the National Department of Public Works as Chief Architect during the period 2013-2015. Sushma is a past board member of the South African Council for the Architectural Profession (SACAP), which regulates the profession, during the period 2015-2017.

Dr Nashwa Eassa is Associate Professor of Physics at Al Neelain University, Sudan. She is undertaking a post-doctoral fellow in Nanophotonics group at Nelson Mandela Metropolitan University (NMMU), funded by the department of Research Capacity Development (RCD) at NMMU. She holds a Ph.D. in physics from the Nelson Mandela Metropolitan University, South Africa and Master of Science in Material Physics and Nanotechnology from Linkoping University, Sweden. Her current research interest lies in developing new technologies which:

Enable direct detection of heavy metals in water.
Synthesize and characterize self-assembled nanostructure.
Develop devices and sensing systems incorporating micro fabrication and nanotechnology.

Awards

Honored Doctorate, Linkoping University, Sweden, 2019.
Elsevier Foundation awards in Mathematics and Physics, 2015.
AGNES Grant for Junior Researchers - supported by AvH and TWAS, 2014.
Research Capacity Development fellowship (RCD), Nelson Mandela Metropolitan University South Africa, 2013.
Organization for Women Scientists for the Developing World (OWSD) Fellowship, 2008.
One of ~550 young scientists selected worldwide to attend the 62nd Lindau Nobel Laureate Meeting, 2012.
Most outstanding poster presentation award in field of material science delivered at SAIP, South African, 2009.

Memberships

Founder & President of Sudanese Women in Sciences Orgnization (SWSO).
Vice-president of Arab Reigon of Orgnization for Women Scientist in Developing word(2016-2020)
Member of South African Institute physics (SAIP).

Dr Guma Kunda Komey is associate professor of Political Geography, Peace and Development Studies, consultant, and civic activist. His areas of research and activism include peace, conflict resolutions, land rights, natural resource governance, and state-society relations. He has carried research projects, consultancies, and publications on those issues, with special reference to the Nuba Mountains in South Kordofan: https://www.researchgate.net/profile/Guma-Kunda-Komey. He is an author of a book Land, Governance, Conflict, and the Nuba of Sudan, 2021

Komey obtained a B.A. (Honors) in Human Geography from the University of Khartoum in 1987; an MA in International Development Economics from the Graduate School of International Relations at the International University of Japan in 1991, a Ph.D. in Economic Geography from the University of Khartoum, Sudan. He was a post-doctoral researcher in Institute of Social Anthropology and a senior research fellow at the Max Planck Institute for Social Anthropology in Germany (2005 -2012). He was a visiting professor in several Universities and Institutes including, the Universities of San Francisco and Texas in USA, Bergen in Norway, Durham in UK, Witwatersrand in South Africa, and Life and Peace Institute in Sweden. He was senior researcher at Institute of Peace and Security Studies, University of Addis Ababa, Ethiopia, 2013 – 2014, and senior fellow at the Rift Valley Institute since 2013 to the present.

Dr Komey served as Peace Advisor in the Office of the Prime Minister Dr Abdalla Hamdok, 2020 -2021; and is currently the Head of Peace Programs Office of The Carter Center (TCC) in Khartoum, Sudan.

In 2021, John Trimble retired as a professor in Industrial Engineering at Tshwane University of Technology (TUT). From 2015-2016, he served as a Fulbright professor at TUT, while collaborating with the South African Post Office on postal innovation. In 2003-2004, he served as a Fulbright Professor in computer science in Zimbabwe. From 1996 to 2015, he worked in the Systems and Computer Science department at Howard University in Washington DC.

He holds a Ph.D. in Industrial and Systems Engineering from Georgia Institute of Technology, a M.Sc. in Operations Research from UC Berkeley, a M.Sc. in Computer Science from Stanford University, and B.Sc. in Engineering from Northwestern University. He is the founding president of the International Network on Appropriate Technology (INAT) and has coordinated nine international conferences on appropriate technology (all in Africa).

Professor Trimble has held numerous management positions in industry. He was manager of Software Quality Assurance at the Advanced Products Division of HP; Manager of Engineering Quality Assurance for the Communications Products division of Amdahl and Software Testing manager for Xerox, Communications Division (all in the USA).

Since joining the academy, he has served as Head of Department, Dean, and Director of Graduate Studies. Prof. Trimble coordinated the development of the Ph.D. program in computer science at Howard University. He has engaged in curriculum development on the international level at University of the Western Cape and TUT in South Africa; the National University of Science and Technology in Zimbabwe, and Umutara Polytechnic University in Rwanda. While serving as Dean at Umutara, he coordinated the development of a new computer science curriculum that led to the university’s acceptance as a national university. While in Rwanda, he also worked with the Ministry of Higher Education reviewing curriculum at other universities.Since joining the academy, he has served as Head of Department, Dean, and Director of Graduate Studies. Prof. Trimble coordinated the development of the PhD program in computer science at Howard University. He has engaged in curriculum development on the international level at University of the Western Cape and TUT in South Africa; the National University of Science and Technology in Zimbabwe and Umutara Polytechnic University in Rwanda. While serving as Dean at Umutara, he coordinated the development of a new computer science curriculum that led to the university’s acceptance as a national university. While in Rwanda, he also worked with the Ministry of Higher Education reviewing curriculum at other universities.

Keynote Talk

Keynote Talk Slot	Tuesday 22	Wednesday 23	Thursday 24	Friday 25
Morning		9 – 10 am Deepak Gadhia	9 – 10 am Sushma Patel	9 – 10 am
Afternoon		2 – 3 pm Lilia Abron	2 – 3 pm	2 – 3 pm John Trimble
Afternoon	5 – 6 pm Myron Williams

Featured Workshops

WORKSHOP TITLE : A GLOBAL ETHICS FOR APPROPRIATE TECHNOLOGY

organizer: Charles Verharen

Discussants / Demonstrators: John Tharakan, Gada Kadoda, George Middendorf, David Schwartzman
Abstract:
This workshop will discuss a set of specific LEED-like ethical principles as a foundation for a global system of ethics for appropriate technology. LEED is the acronym for Leadership in Energy and Environmental Design. The LEED organization offers a green building rating system deployed throughout the world. Modeled on LEED certification, the discussion will start with the ethical principles of the SonghaÃ¯ ecovillage model developed by Godfrey Nzamujo: autochthony (rooted in the physical and cultural soil of the ecovillage community); autonomy (relying on green energy and excluding chemical fertilizers and pesticides); and authentic (responsible for the survival and flourishing of all community members with outreach to surrounding communities). Building upon these three principles, the workshop will consider their compatibility with the United Nations Declarations of Universal Human Rights. The workshopâ€™s conclusion will discuss whether a LEED-like ethical system for appropriate technology applications should be produced consensually by appropriate technology practitioners. While any given set of ethical principles may be a springboard for reflection, changing global circumstances call for constant revaluation of ethical principles capable of confronting contemporary existential crises such as catastrophic climate change and the sixth mass extinction.

Objectives: Consensus on methodology for producing a set of global ethical principles for appropriate technology applications.
Expected outcomes: Reshaping cultural convictions about the status of ethical foundations.
Discussion Points OR Demonstration Areas:

Comparison of LEED principles and ethical systems.
Professor Godfrey Nzamujo's proposed 3 ethical principles.
Comparison with the Indian Muni Seva Ashram''s ethical principles.
Examination of the foundations of the United Nations declarations of human rights.
The possibility of a universal system of ethics for appropriate technology applications.

Intended Audience: All ICAT 10 participants interested in the ethical principles of appropriate technology.

Additional information:The ethics workshop is designed to complement the INAT ethics initiative on a ethics of appropriate technology. This is a two-hours workshop.

WORKSHOP TITLE : WORKING WITH UNDERREPRESENTED GROUPS TO INFORM TECHNOLOGY GOVERNANCE & POLICYMAKING

Workshop organizer: Lassana Magassa

Discussants / Demonstrators: NA

Abstract

Although developing policies and technologies that are informed by the life experiences of underrepresented groups can reduce the likelihood of harm, it can be difficult to get started. Diverse Voices is a method developed to increase the probability that technologists and policymakers can integrate feedback from marginalized communities before an artifact is finalized. This in turn avoids, or at least reduces the likelihood of underrepresented groups being disproportionately harmed. This workshop will introduce the method, describe the methodâ€™s effectiveness, and provide hands-on experience with key aspects. Attendees will briefly explore how Diverse Voices can be used to generate feedback on proposed sustainable community wellbeing initiatives.

Objectives

1. To introduce the Diverse Voices method to attendees.

2. To give attendees an opportunity to practice key parts of the method.

3. Explore how the method can be used in the work attendees are currently involved in.

Expected Outcomes

1.Attendees will understand what gaps the Diverse Voices method is intended to fill.

2. Attendees will be able to perform key aspects of the method.

3. Attendees will explore how the method can be used in their local context
Discussion Points OR Demonstration Areas

Technology is often developed without the circumstances and needs of underrepresented communities in mind.
Technology policymakers mean well, but sometimes fall short and create policies that disproportionately harm underrepresented communities.
To properly consider how a particular technology or policy would negatively impact the life experiences of underrepresented communities.
Diverse Voices accomplishes this by holding three to four expert panels, each with 3 to 6 participants on a mature draft of a policy document or technology.
Panels that are convened after developing a list of all possible underrepresented groups that might be negatively impacted and finalized after discussion about who is least likely to be represented in conversations.
Each panel will have a minimum of 2 people with lived-experience in addition to people (for example friends, family, lawyers, community aid workers, etc.) who support their experiences.
In preparation for panel sessions, short videos and comic strips demonstrating the promise and peril of a technology or class of technologies are identified.
Panel sessions are recorded, facilitated by two people, and transcribed.

9. The transcribed audio files are analyzed with the discussed technology in mind. A synthesis document is prepared and shared with the author(s) of a policy document or technology.
Intended Audience: Policymakers, Technologists, Community Advocates, Government
Additional Information:This is a half-day workshop.

WORKSHOP TITLE: ECOLOGICAL APPROACHES TO FOOD SECURITY AND PEACE IN THE SAHEL FROM THE SMALL HOLDER FARMER UP

Workshop organizer: Passion of Hope International - USA

Discussants / Demonstrators: Mariam Olorundare, Marwan Awad, Enayat Mohaker

Abstract:

The expansion of farming in traditional pastureland has resulted in desertification in the Sahel region with implied climate change and socio-economic instability. This has impacted the resilience of pastoral livelihoods and weakened regional livestock markets which rely on unrestricted mobility of herders. In turn, conflict-related crises have escalated, including violent extremism and forced displacement in some countries.This workshop intends to bring key stakeholders into dialogue in addressing the issues which underline these regional instabilities. The objectives of the workshop are to explore the role governments should play in regional agricultural policy and land use management. The workshop has the following outcomes:

Discussion between farmers and cattle herders which leads to collaboration and peaceful economic co-existence.
Recommendations on agricultural policy and land use management to government which are environmentally sustainable, support regional economic resilience, increase food security, and minimize existing tensions between key stakeholders.
Introduction of appropriate technologies which embrace regenerative agriculture, peer-to-peer cooperation, and value-addition for increased financial success.

4. Facilitation of ongoing constructive discussions between key stakeholders which promotes environmental and economic stability in the Sahel regions and beyond.

Discussion Points OR Demonstration Areas:

1.How can appropriate technology knowledge reach rural farmers?
2.Creating value for farm products and getting it to the market
3. Financial opportunities for farmers and how it can be accessed.
4.Agricultural sustainability through forestry recovery.
5. Risk of rain distribution and floods. Water harvesting model.
6. Water harvesting model.
Intended Audience: Stakeholders in the Sahel regional economy (small-holder farmers, cattle herders, commercial-scale farmers, traders, students, financial institutions, and government policy makers).
Additional Information: This workshop will be hosted virtually for two days prior to the in-person/hybrid workshop.

WORKSHOP TITLE : 3D Printing Fundamentals: Getting Started on Printer Configuration, Troubleshooting, and CAD file to Object Steps

Workshop organizer:Jephias Gwamuri

Discussants / Demonstrators :William Goriwondo

Abstract:
This workshop aims to empower participants who own (or intent to) with the basic skills to enable them to derive the most value out of their 3D Printers. Among the topics to be discussed are: introduction to 3D printing, general; procedures for troubleshooting and CAD file development to physical object. The workshop will be help online and all participants are expected to have access to PC in addition to a reliable internet connection.

Objectives: To capacitate participants with basic 3D printing skills

Expected Outcomes: Increased adoption and usage of 3D printing technologies by universities and communities.

Discussion Points OR Demonstration Areas:

Why 3D Printing?
Who should own a 3D Printer?
Selecting CAD Software. What should one consider?

Intended Audience: All innovators and promoters of the 4IR

WORKSHOP TITLE: SUSTAINABLE COMPUTING USING THE RASPBERRY PI PLATFORM

Organizer: Jesse L. Bemley, Ph.D. Joint Educational Facilities

Names of Other Discussants OR Demonstrators: Bryan Bemley, Anthony Adedoyin, Olaoluwa Adewoye

Abstract

Since the dawn of the technological age, computers have enabled the human race to achieve major milestones in all aspects of our lives. However, the digital divide, the gulf between those who have ready access to computers and the internet, and those who do not, has been a constant factor in areas around the world with limited resources. Organizations such as the Raspberry Pi foundation are developing the means to provide a bridge over this divide by providing low-cost equipment and resources for people who want to learn more about technology and its applications to society. This presentation will introduce the Raspberry Pi platform as a sustainable technology platform, and attempt to inspire people to embrace this platform to learn more about technology. Additionally, the following Raspberry Pi models will be explored with multiple use-cases for sustainable technology and everyday use: Raspberry Pi, Raspberry Pi 2, Raspberry Pi 3, Raspberry Pi 4, Raspberry Pi 400, and Raspberry Pi Zero.

Objectives

To introduce the Raspberry Pi platform,
To identify the current Pi models that are available,
To provide a few use cases where this platform can excel

Expected Outcomes

Participants will be able to discuss the components of a Raspberry Pi system.
Participants will be able to identify and discuss the several Raspberry Pi Models.
Participants will be able to discuss how they can use a Raspberry Pi.

Discussion Points OR Demonstration Areas

there will be a PowerPoint presentation, as well as visual aids showing multiple Raspberry Pi models, and a Raspberry Pi 400 Demonstration at the end of the presentation.

Intended Audience : Intended for all ages and backgrounds

Minimum Time Required : Two Hours

The materials : Participants will be provided with a link for handouts.

Additional Information

JEF would like to provide a Raspberry Pi 400 as a prize for some activity at the end of the Workshop. Can you provide a suitable activity?

WORKSHOP TITLE: COLLABORATIVE DESIGN AND CONSTRUCTION WORKSHOPS BUILD LOCAL CAPACITY IN SOLAR OVENS AND SMALL WIND TURBINES ON SUMBA ISLAND, INDONESIA - USEFUL OUTCOMES FOR AUTONOMOUS RENEWABLE ENERGY GENERATION?

Organizer: Tim Frodsham

Names of Other Discussants OR Demonstrators:Tim Frodsham

Abstract

This work was undertaken to support local demand for improvements in utility, replicability, and affordability for small-scale hybrid energy for off-grid use in isolated settlements, with a particular focus in Eastern Indonesia, serving as a test case for wider applications in similar remote off-grid contexts in low-income areas. Surveys undertaken by partner researchers (Sumba Renewable Energy Group) as well as collaborative design and construction workshops were conducted to build local capacity for both renewable energy technology and more balanced gender function. The collaborative design sought to improve and diversify the generation and storage of two forms of renewable energy, respectively wind power, and solar thermal energy, in the form of a box-style solar oven. These systems were subjected to a six-week trial, to ascertain baseline data for user behavior expectations, as well as basic functionality.

OBJECTIVES

Improvements for small-scale hybrid energy for off-grid use in isolated settlements.
Collaborative design and construction with balanced gender participation.
Acquire baseline data for user behavior and expectations, as well as basic functionality.

Expected Outcomes

Improvements for small-scale hybrid energy for off-grid use in isolated settlements,
Collaborative design and construction with balanced gender participation.
Acquire baseline data for user behavior and expectations, as well as basic functionality. Acquire baseline data for user behavior and expectations, as well as basic functionality.

Discussion Points OR Demonstration Areas

Effectiveness of the use of local materials
Implications of gender-balanced participation
User behavior constraints versus opportunities

Intended Audience

Appropriate Technology makers, researchers Gender specialists, Social researchers, and Local economy-focused NGO interests.

Time Required: Two Hours

Materials: Pencils/pens, paper, whiteboard (for interactive discussions), PowerPoint projector equipment

Additional Information

Keywords for discussion ideas about this workshop:

Low-Cost Technology Transfer, Climate impact adaptation, Gender Equity, Reproducibility, Cultural Exchange, International Collaboration.

WORKSHOP TITLE : WASH (WATER. SANITATION AND HYGIENE) IN ELFASHER

Organizer: El Fasher University College of Medicine Students

Names of Other Discussants OR Demonstrators : Mustafa Omer, Mehad Khalil, Mayada Yousif, Mustafa Abdoalrhman, Saif Elislam Adam

Abstract

The population growth of El Fasher city and the war that broke out in the Darfur region and caused the displacement of a large number of citizens inside El Fasher city exacerbated the problem of the lack of clean water suitable for drinking and use. Which led the citizens to save water in different ways to store water and reuse it in periods of water scarcity and water supply interruption from the main line. As a result, diseases and epidemics spread due to water pollution, in addition to some societal and behavioral practices of individuals related to the method of transporting and storing water and the cleanliness of the used containers, in addition to environmental reasons related to the nature of untreated water in the area, which is used by citizens directly without purification. This workshop aims to discuss common diseases associated with the use of impure water, as well as identifying environmental causes and societal practices that increase impure water and cause its pollution, and technical solutions to address and purify the water problem in the region.

Objectives

Discussing the water problem and its impact on the health aspect, and identifying community practices to reduce the water problem Diseases caused by the use of impure water.

Expected Outcomes

Finding solutions for water treatment focusing on the health, environmental, technical and social aspects

Discussion Points OR Demonstration Areas

1.Causes and water sources in the city
2.The impact of water scarcity on society and how to deal with it.
3.Diseases and the effects resulting from these habits.
4.Suggested technical solutions that include all dimensions.

Intended Audience :Those interested in public health, community health, the environment and appropriate technology

Time Required :Two Hours

Conference Programme

Dec 8-10 Post-Conference Programme

Update 5 December 2022: Find the extended post-conference programme at the link above.
The information below is for the 22-25 Nov programme.

Calendar View Download the Programme

DAY 1: Tuesday 22 November [Venue: Faculty of Architecture, University of Khartoum]

TIME (Central Africa Time)	ROOM A	ROOM B	ROOM C	ROOM D
8 - 9 AM	INVITED WORKSHOP (VII): Water and Sanitation WASH (WATER, SANITATION AND HYGIENE) IN ELFASHER *Organizers:* Mustafa Omer Mohammed, Mehad Khalil Adam Mohammed, Mayada Yousif Ibrahim Mansur, Mustafa Abdoalrhman Mohamed, and Saif Elislam Adam Musa Abdelkareem Join Room A	INVITED WORKSHOP (II): Governance \| Policy, Standards, and Ethics WORKING WITH UNDERREPRESENTED GROUPS TO INFORM TECHNOLOGY GOVERNANCE & POLICYMAKING Organizer: Lassana Magassa Join Room B	INVITED WORKSHOP (III): Environment, Agriculture, and Ecovillages ECOLOGICAL APPROACHES TO FOOD SECURITY AND PEACE IN THE SAHEL FROM THE SMALL HOLDER FARMER UP Organizers: Brian Stephenson, Mariam Olorundare, Marwan Awad, and Enayat Mohaker Join Room C	INVITED WORKSHOP (IV): Manufacturing 3D PRINTING FUNDAMENTALS: GETTING STARTED ON PRINTER CONFIGURATION, TROUBLESHOOTING, AND CAD FILE TO OBJECT STEPS Organizers: Jephias Gwamuri and William Goriwondo Join Room D
9 - 10 *Tea/Coffee
10 - 11	INVITED WORKSHOP (VI): Energy and Materials COLLABORATIVE DESIGN AND CONSTRUCTION WORKSHOPS BUILD LOCAL CAPACITY IN SOLAR OVENS AND SMALL WIND TURBINES ON SUMBA ISLAND, INDONESIA - USEFUL OUTCOMES FOR AUTONOMOUS RENEWABLE ENERGY GENERATION? Organizer: Tim Frodsham Join Room A
11 - 12
*12 - 1 Lunch**
1 - 2	INVITED WORKSHOP (V): Education, Knowledge, and Technology Transfer SUSTAINABLE COMPUTING USING THE RASPBERRY PI PLATFORM Organizers: Jesse Bemley, Bryan Bemley, Anthony Adedoyin, and Olaoluwa Adewoye Join Room A	INVITED WORKSHOP (I): Governance \| Policy, Standards, and Ethics A GLOBAL ETHICS FOR APPROPRIATE TECHNOLOGY Organizers: Charles Verharen, John Tharakan, Gada Kadoda, George Middendorf, and David Schwartzman Join Room B	(continued)	(continued)
2 - 3			(continued)	(continued)
3 - 4	WELCOME RECEPTION Akram El Khalifa and Amel Bakhiet *[Featuring Lyrical Poetry and Folk Dances* by Students from Faculty of Education (University of Khartoum) Schools]** Join Room A
4 - 5	KEYNOTE TALK (I) THE DELUSION OF (NEUTRALITY OF TECHNOLOGY): A CRITIQUE FROM A REGIONAL PERSPECTIVE Speaker: Mohamed Abdelrahman Hassan Moderator: Aya Aziz Join Room A
5 - 6 PM	KEYNOTE TALK (II) TOWARDS A MORE CIRCULAR ECONOMY: RECYCLING ORGANIC WASTES INTO BIOGAS AND FERTILIZER Speaker: Myron Williams Moderator: John Trimble Join Room A

DAY 2: Wednesday 23 November [Venue: Ministry of Higher Education and Scientific Research, Khartoum]

TIME (Central Africa Time)	ROOM A	ROOM B	ROOM C	ROOM D
8 - 9 AM	OPENING SESSION Conference Chair: Gada Kadoda, International Network on Appropriate Technology Chair and Co- chair, Local Organizing Committee: Akram El Khalifa, University of Khartoum Amel Bakhiet, Sudan University of Science and Technology Guest Speakers: President, International Network on Appropriate Technology Vice Chancellor, University of Khartoum Vice Chancellor, Sudan University of Science and Technology Sponsors: Ministry of Higher Education and Scientific Research Gibela Research Chair Join Room A
9 - 10 *Tea/Coffee	KEYNOTE TALK (III) EVOLUTION OF SOLAR CONCENTRATOR TECHNOLOGY IN INDIA FOR THERMAL APPLICATIONS LIKE SOLAR COOKING, COOLING AND POWER GENERATION Speaker: Deepak Gadhia Moderator: John Tharakan Join Room A
10 - 11		PAPER SESSION: Climate Change Chair: Taurai Mutanda 26: INCREASE ATMOSPHERIC WATER GENERATING EFFICIENCY BY USING THERMOELECTRIC COOLERS CHIP AND ELECTROLYTE LIQUID Rumaisa Mohey Eldin Abd Elaziz Miki, Tahleel Mahmoud Idrees Abdelhafeez, Mustafa Ibrahim Yousif Ishaq, and Mohamed Ibrahim Salih Fadul 105: MULTIPLE-CRITERIA DECISION ANALYSIS FRAMEWORK FOR WATER INFRASTRUCTURE DEVELOPMENT PRIORITIZATION IN SUDAN Eiman M. Karar and Bouran Awad Hassan 130: FACTORS AFFECTING SOLAR BOXCOOKER (SBC) TECHNOLOGY ADOPTION IN KHARTOUM STATE, SUDAN Mawahib E. Ahmed and Nouralla Y. Bakhiet 186: ECOVILLAGE MODELS AS SOLUTIONS TO COMMUNITY VULNERABILITY TO HUNGER, DISASTERS AND DEVELOPMENT CHALLENGES IN AFRICA George Atisa, Sharon McIntyre, and Cecilio Ortiz-Garcia 198: USING GEOSPATIAL TECHNIQUES TO ASSESS LANDUSE CHANGE DUE TO FLOOD HAZARD IN KOSTI LOCALITY, SUDAN Sona Mohammed Fadoul Mohammed 213: BUILDING THE ELECTRICITY SECTOR IN SUDAN: ADDRESSING FAULT SCENARIOS IN SMART GRID Nahla Mustafa Ali Join Room B	PAPER SESSION: Education, Knowledge, and Technology Transfer (I) Chair: Marwan Adam 20: THE BAREFOOT WAY TOWARD “FREEDOM, PEACE, AND JUSTICE”: A QUIET REVOLUTION Gada Kadoda 220: AFRICAN ETHICS AND AN IDENTITY FOR GLOBAL SUSTAINABILITY Enrico J. Wensing and Alexia J. Wensing 72: RE-ENGINEERING ENGINEERING EDUCATION FOR SUSTAINABLE DEVELOPMENT John Tharakan 161: DEVELOPING RESILIENT COMMUNITIES: THE ROLE OF HIGHER EDUCATION INSTITUTES Walaa Ahmed and Akram Elkhalifa 192: EQUIPPING FUTURE DESIGN ENTREPRENEURS WITH APPROPRIATE SMALL-BATCH MANUFACTURING TECHNOLOGIES Oratile R. Mokgatla and Daniel Carstens 195: DETERMINANTS OF SUSTAINABLE COMPETITIVENESS IN AFRICA: ANALYSIS WITH THE OPEN QUINTUPLE HELIX MODEL Bernadin Géraud Comlan Ahodode 196: UNIVERSITY-INDUSTRY COLLABORATION, LEARNING, AND INNOVATION IN AFRICA Bernadin Géraud Comlan Ahodode and Joel Stephan Tagne Join Room C	PAPER SESSION: Health Chair: John Tharakan 12: SIGN LANGUAGE GLOVES (ARABIC SIGN LANGUAGE) Hamid Mohamed Hamid Mohamed, Mohamed Osama Omer Abuzaid, Tahleel Mahmoud Idrees Abd-Alhafeez, and Amin Galal Elhag Mohamed 151: APPLICABLE INDUSTRY 4.0 – TECHNOLOGIES IN HEALTH 4.0: A REVIEW Meshack Mazibuko, Lagouge Tartibu, and Robert Mutyavavire 185: USING DATA ANALYTICS TO PREDICT COVID-19 CASES IN SUDAN Aisha Abdel Aziz Elhussien Ali, Marwa Olaish Ahmed Khalafallah, Rugia Ismail Mohamed Ahmed, and Izzeldin Kamil Amin 191: UNIVERSITY TO INDUSTRY: THE COMMERCIALISATION OF APPROPRIATE MEDICAL DEVICES IN THE SOUTH AFRICAN CONTEXT Dominic White and Ashton Margarete Moseley Join Room D
11 - 12 PM	PAPER SESSION: Sustainability, Social Inequality, and Human Wellbeing \| Green Economy and Innovation Chair: Marcel J. Castro Sitiriche 66: INTEGRATED DEPRIVATION AREA MAPPING SYSTEM FOR DISPLACEMENT DURABLE SOLUTIONS AND SOCIO-ECONOMIC RECONSTRUCTION, SUDAN Nuha Eltinay, Monika Kuffer, Caroline Margaux Gevaert, Inas M.M. Ali, Charlotte Flasse4, Cheruiyot Onyambu, Maysoon Badi, Asgad Gummah, Kumi Julia, Ibrahim Kushieb, Wafa Sakhi, Taha Elzaki, Mosub Abdallah8, Marwa Ali, Mustafa Hamza, and Fatima Ahmed 162: APPROPRIATE METHODS TO ENSURE HOUSING PROVISION FOR THE LOW-INCOME GROUPS IN KHARTOUM, SUDAN Shaza Khatab and Mustafa, A/Bagi Join Room A			PAPER SESSION: Water and Sanitation Chair: Sahl Yasin 5: FLUORIDE REMOVAL FROM GROUND WATER IN THE EAST NILE AREA (SUDAN) USING LOCALLY AVAILABLE CHARCOAL Motwkel Mahmoud Ibraheem Alhaj and Bashir Mohammed Elhassan 157: WATER QUALITY MODEL FOR BLUENILE KHARTOUM STATE- SUDAN USING HEC-RAS APPLICATION Mohamed Elfatih Mohamed Fadlelseed, Michael Magdy Mounir Kamel, Alwleed Seif Aldeen Khider, and Khalid Altegani Khalid Abdullah 93: MODIFIED CERAMIC POT FOR WATER PURIFICATION METHODS IN RURAL AREAS IN SUDAN Sahl Yasin, Noha Almahi, Gameraldawola Mustfa, Haider Abaker, Rabei Suliman Join Room D
*12 - 1 Lunch**
1 - 2	PANEL: BEST PAPERS (I) Cities and Space & Construction and Infrastructure Energy and Materials Health Peace, Security, and Safety Moderator: Charles Verharen Join Room A
2 - 3	KEYNOTE TALK (IV) WASTEWATER TREATMENT AS IF PEOPLE MATTERED! Speaker: Lilia Abron Moderator: Hattie Carwell Join Room A
3 - 4 *Tea/Coffee	PAPER SESSION: Construction and Infrastructure \| Cities and Space (I) Chair: Amged O. Abdelatif 53: EXPERIMENTAL ASSESSMENT OF FABRIC- REINFORCED CEMENTITIOUS MORTAR (FRCM) MECHANICAL PERFORMANCES Alaa Mohammed Ali, Marco Di Ludovico, and Costantino Menna 99: UTILIZING OF PLASTIC WASTE INTO MANUFACTURING OF PAVER TILES Ali Hussein M. Ali and Abdelmonim Adam Haroun 167: THE EFFECT OF USING CEMENT DUST ON THE PROPERTIES OF MORTAR AND CONCRETE Ali Hussein M. Ali and Adel Salah A. Alrahim 199: DESIGN OF PASSENGER CARS ASSEMBLY FACTORY IN NORTH OF KHARTOUM USING BUILDING INFORMATION MODELLING (BIM) Mohamed Elrashid Mohamed, Ahmed Mohamed Doul, Mohamed Yousif Mudawi, Naji Mohammed Othman, Mohammed Tagelsir Abdelsalam, and Aziz Fadoul 23: ARTIFICIAL INTELLIGENCE APPROACH FOR PREDICTING THE COMPRESSIVE STRENGTH OF CONCRETE MIXTURE Alziber Mohammed, Ayman Salah, Moayad Jamal, Omer Ali, and Yousif Hummaida Ahmed Join Room A	TECHATHON Organizer: Mjumbe Poe Join Room B	WORKSHOP: Education, Knowledge, and Technology Transfer (I) 10: PLASTIC-FREE PERIOD: MENSTRUAL CUPS Organizers: Marwa Tageldin, Muna Abdelrahman, Maisaa Dean, and Aamir Dean Join Room C	WORKSHOP: Governance \| Policy, Standards, and Ethics (I) 169: OPEN DATA SHARING PROTOCOL: A SUDANESE EXPERIMENT Organizers: Safa Suliman, Marwan Adam, Rofaida El Zubair, Gada Kadoda Join Room D
4 - 5		TECHATHON Organizer: Mjumbe Poe Join Room B
5 - 6 PM

DAY 3: Thursday 24 November [Venue: Ministry of Higher Education and Scientific Research, Khartoum]

TIME (Central Africa Time)	ROOM A	ROOM B	ROOM C	ROOM D
8 - 9 AM	MEETING: INTERNATIONAL NETWORK ON APPROPRIATE TECHNOLOGY (INAT) Chair: John Trimble Join Room A
9 - 10 *Tea/Coffee	KEYNOTE TALK (V) APPROPRIATE SCALES OF ARCHITECTURE FOR THE AFRICAN ANTHROPOCENE Speaker: Sushma Patel Moderator: Akram El Khalifa Join Room A
10 - 11	PAPER SESSION: Environment, Agriculture, and Ecovillages Chair: Brian Stephenson 28: MUTUAL RELATIONSHIP BETWEEN LAND DEGRADATION AND POVERTY IN SUDAN Mohammed Abdalla Elsheikh and Eltayeb Suleiman Babikir 29: THE SMART JUBRAKA: A SUSTAINABLE HOME GARDEN FOR FOOD SECURITY Enayat Salih, Marwan Adam and Fatima Ali 33: ELECTROCOAGULATION OF CATTLE MANURE WASTEWATER Bianca Bailey, Rabin Bhattarai, Tony Grift, and Sharvi Goyal 35: EFFICACY OF CONSTRUCTED WETLAND IN THE IMPROVEMENT OF EFFLUENT FROM SOBA STABILIZATION PONDS, KHARTOUM, SUDAN 2021 Ibrahim Ahmed Suliman Bdal, Babiker Ahmed Babiker, and Aziza abd Elgadir Mohammed Abd Ulla 205: DESIGNING A PORTABLE TREATMENT SYSTEM FOR EQUIDS IN RURAL SOUTH AFRICA IN A POSTHUMAN-CENTRED DESIGN FRAMEWORK Azél Viljoen and Martin Bolton Join Room A	PAPER SESSION: Construction and Infrastructure \| Cities and Space (II) Chair: Aamir Dean 110: PREDICTION OF SOIL’S COMPACTION CHARACTERISTICS USING ARTIFICIAL NEURAL NETWORKS (ANNs) Mohamed Alhag Emad Mohamed, Alzobair Mohammed, and Ahmed Mohammed Elsharief 120: REMARKS ON IDENTIFICATION AND APPROACHES OF PROTOTYPE BUILDINGS IN SUDAN_THE CASE OF PUBLIC SERVICES BUILDINGS Razan Abdelgadir, Rami Zeinelabdein, and Tallal Saeed 134: SOLVING THE URBAN PROBLEMS FROM WITHIN: THE CASE OF MAYOUP Mirametta Botrous and Akram Elkhalifa 206: ACHIEVING RESILIENCE IN COASTAL COMMUNITIES: A CASE STUDY OF JABAL AWLIYA LOCALITY, KHARTOUM-SUDAN Hanan Alswahli, Samah Tambal, and Mohammed Gismallah 13: THE ROLE OF SUDANESE PRIVATE SECTOR IN PEACEBUILDING IN WASH SECTOR: INITIATION OF INFRASTRUCTURE FOR PEACE PRACTICES Bouran Awad Hassan Join Room B	PAPER SESSION: Education, Knowledge, and Technology Transfer (II) Chair: John Trimble 208: FOOD WASTE, NOT IN GOOD TASTE: AN INVESTIGATION OF THE CAUSES OF FOOD WASTE IN THE NATIONAL SCHOOL NUTRITION PROGRAMME Tressilia Mumba, and Hema Kesa 152: COVID-RESPONSIVE STUDIO MANAGEMENT SYSTEMS IN ARCHITECTURAL EDUCATION: THE CASE OF UNIVERSITY OF KHARTOUM Duaa Abdalhaleem, Akram Elkhalifa, and Malathe Hamid 52: CLOUDS OF LIES OBSCURE SUDAN’S SKY: POLITICS OF MISINFORMATION, DISINFORMATION, AND HATE IN TIMES OF TRANSITION Husam Mahjoub and Marwan Adam 90: AN ASSESSMENT OF THE EFFECTS OF SOCIAL MEDIA ON LEARNERS AT NUST IN BULAWAYO, ZIMBABWE Sibangiso Ngwenya and Khesani Richard Chilumani 207: PREDICTION AND ANALYSIS MODEL FOR ACADEMIC SCHOOL PERFORMANCE (SUDANESE PRIMARY SCHOOLS AS CASE STUDY) Safa Suliman, Asma Idris, Sara Mergani, and Duha Gaafar 190: AN ANALYSIS OF IMPACT OF SEO FOR SUDANESE UNIVERSITIES WEBMETRICS RANKING, CASESTUDY: UNIVERSITY OF KHARTOUM WEBSITES Nada Ali Join Room C	PAPER SESSION: Peace, Security, and Safety Chair: Charles Verharen 17: KNOWLEDGE NETWORKING FOR EAST AFRICA CSO NETWORK FOR PEACEBUILDING AND CONFLICT PREVENTION (ECONET) Marwan Adam, Dalia Eissa, and Gada Kadoda 197: REGIONAL SPATIAL STRATEGY AS A TECHNICAL TOOL FOR PEACE CONSOLIDATION IN SUDAN Salah Mahmoud Osman 129: DECENT HOME DESIGN FOR RESETTLEMENT OF WAR DISPLACED IN DARFUR, SUDAN Fatimah Abubaker Join Room D
11 - 12 PM				PAPER SESSION: Governance \| Policy, Standards, and Ethics Chair: Charles Verharen 203: A VISION OF LEED-LIKE ETHICAL STANDARDS FOR A GLOBAL CONSORTIUM OF ECOVILLAGES Charles Verharen, Flordeliz Bugarin, John Tharakan, George Middendorf, David Schwartzman, Peter Schwartzman, Gada Kadoda, Bekele Gutema, and Enrico Wensing 73: SUDAN ICT POLICY PLANNING: CITIZENS CENTRED, MULTI-STAKEHOLDER, AND MCDA FORMULATION FOR ICT POLICY Marwan Adam and Osama Khair 217: PEOPLE-CENTERED EVALUATION OF INDUSTRIAL POLICIES IN POST REVOLUTION SUDAN 2019-2021 Muzan Alneel Join Room D
12 - 1 *Lunch
1 - 2	PANEL: BEST PAPERS (II) Climate Change Environment, Agriculture and Ecovillages Water and Sanitation Education, Knowledge and Technology Transfer Governance & Policy, Standards, and Ethics Moderator: Taurai Mutanda Join Room A
2 - 3	KEYNOTE TALK (VI) NANO-MATERIALS FOR ENERGY APPLICATIONS & WOMEN IN STEM IN SUDAN Speaker: Nashwa Eassa Join Room A
3 - 4 *Tea/Coffee	FORUM: WOMEN IN STEM AND APPROPRIATE TECHNOLOGY Chair: Mariam Abdelghafour Professor, UNESCO Chair of Science, Technology, and I), Sudan University of Science and Technology PART I: Presentations (1 hour) STEM Sudan Projects: Hassan Baba Director, STEM Sudan Young girls in Scratch Project, 2022. Team: Ola Mohamed (15 yrs.), Doaa Saifeldin (14 yrs.), Sara Mutasim (12 yrs.), Siba Tageldin (13 yrs.) and Muzan Alfadel (12 yrs.) Supervisor: Yousif Alamin, Sudan University of Science and Technology. University students and fresh graduate group Project, 2019. Team: Rawah Hassan, Rihab Alsayed, and Marwa Salah Supervisor: Hashim Faisal, University of Khartoum. Featured Women Innovators: Maab Arbab Mohammed Elfadul Engineer, Cooperation International (COOPI) Organization, Sudan Safia Elfadni Medical Doctor and Entrepreneur, Alsalam Factory, Sudan PART II: PANEL (2 hours) Panelists: Hattie Carwell Vice President, International Network on Appropriate Technology, USA Iman Abuelmaaly Adelrahman Professor, University of Khartoum Amira Osman Professor, Tshwane University of Technology, South Africa Commentator: Weam Shawgi Feminist and Gender Defender, Sudan Join Room A	PAPER SESSION: Energy and Materials Chair: Jephias Gwamuri 219: SOLAR POWER FUTURES: BOTTOM-UP POWER Lyam Rivera, Javier Moscoso-Cabrera, Alexis Burgos-Rivera, Reiner Simshauser-Arroyo, and Marcel Castro-Sitiriche 216: MICROALGAL BIOMASS AS BIOFACTORIES FOR THE PRODUCTION OF BIOENERGY AND BIOFUNCTIONAL COMPOUNDS FOR PHARMACEUTICAL APPLICATIONS Taurai Mutanda, Nicole Pillay and Akash Anandraj 79: RENEWABLE ENERGY ALGORITHM TOOL FOR RURAL ELECTRIFICATION AND APPROPRIATE Robert A. García Cooper and Marcel Castro Sitiriche 184: REAL ENVIRONMENTAL PROBLEMS REQUIRING REAL SOLUTIONS: THE DEVELOPMENT AND APPLICATION OF INNOVATIVE BIOMATERIALS IN NEW PRODUCT DEVELOPMENT WITHIN INDUSTRIAL DESIGN EDUCATION Martin Bolton 175: ANALYSIS OF ROOFTOP GRID CONNECTED SOLAR PV VS UTILITY SCALE PV POWER PLANT, SUDAN CASE STUDY Mahmoud Hassan Onsa, and Iman Onsa 144: INNOVATIVE METHODS TO IMPROVE AERODYNAMIC PERFORMANCE OF SAVONIUS TYPE WIND TURBINE Mai K. H. Mohamed, Hadia I. E. Elhassan, and Eltayeb M. Eljack 153: CONTROL OF DYNAMIC STALL ON A PITCHING AIRFOIL USING A LEADING-EDGE ROTATING CYLINDER Munib Zain, Elasim Elhaj, and Eltayeb Eljack 141: AIRFOIL GUST LOAD ALLEVIATION USING A ROTATING LEADING-EDGE CYLINDER Ahmed M. A. AbdAllah, Moayed S. M. Hassan, Eltayeb M. Eljack. Join Room B	WORKSHOP: Education, Knowledge, and Technology Transfer (II) 7: HOW TO INCORPORATE A CITIZEN SCIENCE APPROACH INTO AT PROJECTS? Organizers: Gada Kadoda, Marwan Adam, Rofaida El Zubair, Safa Mohamed, Rawan Sharfi, Wadah Omer, Fatima Salah, Sahl Wasin, and Dalia Eissa Join Room C	WORKSHOP: Governance \| Policy, Standards, and Ethics (II) 2: SCIENCE, TECHNOLOGY AND INNOVATION APPLICATION TO BUILD GRAND HYDROELECTRIC GENERATION DAMS IN AND FOR AFRICA: THE CASE OF GERD Organizer: Mammo Muchie Professor, Tshwane University of Technology, South Africa Panelists: Asim El Magraby Professor, Environmental Science, Ecosystem Management and Conservation, University of Khartoum Muna Musnad Assistant Professor, UNESCO Chair in Water Resources, Omdurman Islamic University Adil Elkhidir Associate Professor, Water Research Center, University of Khartoum Join Room D
4 - 5
5 - 6		PAPER SESSION: Technology R&D \| Services Industry Chair: Jephias Gwamuri 132: THE DEVELOPMENT OF AN APPROPRIATE ASSISTIVE DEVICE FOR WATER SAFETY TRAINING IN SOUTH AFRICAN SCHOOLS Wessel Wessels and Ashton Margarete Moseley 46: WASTE WATER TREATMENT VIA ACTIVATED FLY ASH ADSORBENT Afaf Ghais Abadi Join Room B
6 - 8 PM	CONFERENCE DINNER

DAY 4: Friday 25 November [Venue: Ministry of Higher Education and Scientific Research, Khartoum]

TIME (Central Africa Time)	ROOM A	ROOM B	ROOM C
9 - 10 AM *Tea/Coffee	KEYNOTE TALK (VII) APPROPRIATE TECHNOLOGY, AND SUSTAINABLE PEACE AND DEVELOPMENT: A REFLECTION ON SUDAN Speaker: Guma Kunda Join Room A
10 - 11	PANEL: KNOWLEDGE PRODUCTION AND INNOVATION IN AFRICA Chair: Mohamed El Amin El Tom Professor; Former Minister of General Education (2019 – 2021) Panelists: John Trimble Professor, Tshwane University of Technology, South Africa; President of the International Network on Appropriate Technology Khalid Ali Engineer and Business Consultant; co-founder of Impact Hub Khartoum, Sudan Gussai H. Sheikheldin PhD; Research Fellow with STIPRO (Science, Technology and Innovation Policy Research Organization), Tanzania; and former Director of IRCC (Industrial Research and Consultancy Centre), Sudan (2020 – 2021) Khansa Alhag Engineer; Managing Partner of 249 Startups Sudan Yahia Holi Executive Office Manager, National Information Centre, Sudan Tanzeil Hashim PhD Candidate; Forensic Chemist, Sudan Forensic Laboratory Join Room A
11 - 12 PM
12 - 2	LUNCH & PRAYERS BREAK
2 - 3	SCHOOL STUDENTS’ SESSION: This is an exhibition of SCIENCE PROJECTS and ART WORKS by students from the following organizations and schools: STEM SUDAN JUNIOR INNOVATORS STEPS INTERNATIONAL SCHOOL Join Room A	TECHFAIR SESSION: 8: DUNIA AL-MADARIS: A PROJECT BLENDING APPROPRIATE TECHNOLOGY AND CITIZEN SCIENCE Gada Kadoda, Marwan Adam, Rofaida El Zubair, Safa Mohamed 160: CONTROLLING FLOOD AND BENEFITING IN IRRIGATION PURPOSES AND IN GENERATION ELECTRICITY IN THE RIVER NILE Enas Bushra Homaida Ahmed, Maab Mohamed Ahmed Omer, and Maaz Omer Mohammedani Hamed 61: ONLINE ELECTION DASHBORAD FOR CANDIDATES VOTING Safa Mohammed Ahmed Suliman and Iman Adam El Tayeb Join the virtual space	POSTER SESSION: 50: TUTI ISLAND – PROPOSALS OF SUSTAINABLE URBAN DEVELOPMENT Andrea Dung, Martin Speth, and Clemens Bonnen 107: IMPROVING INCUBATION PROGRAMS MECHANISMS FOR CREATIVE IDEA TO ENHANCE PRODUCTION PROCESS Yahia Holi 18: GOLD DETECTION USING REMOTE SENSING AND ARTIFICIAL NEURAL NETWORK TECHNIQUES Ahmed Dawod M. Ibrhum, Moawia Elfaki Yahia Eldow, and Anwar F.A. Dafaalla 94: THE USE OF RECYCLED SLAG STEEL POWDER IN FINGER PRINT PROCEDURE AFTER CHEMICAL TREATMENT Abdelazem E.A. Mohamed, Sahl Yasin, Abdelsakhi Suliman, Sara Eljaile, Mohammed A. Halato, and Siddig T Kafi 148: NUMERICAL INVESTIGATION OF AIRFOIL DIPOLE NOISE DUE TO FLOW SEPARATION AND REATTACHMENT AT NEAR STALL CONDITIONS Mohamed G. H. Salih, Omer E. K. Mustafa, and Eltayeb M. Eljack 154: NUMERICAL SIMULATION OF FLUID FLOW AND HEAT TRANSFER IN A PLANETARY GEARBOX Rawy J.M. Ibrahim, Ammar E.M. Elamin, and Eltayeb M. Eljack 155: IMPROVEMENT OF AERODYNAMIC PERFORMANCE OF STRAIGHT-BLADED DARRIEUS WIND TURBINE USING BLADES EQUIPPED WITH MOVING SURFACE Abdelsalam Sharfy, Albraa S. S. Mohammed, and Eltayeb Eljack 60: DESIGN OF A PROSTHETIC KNEE-JOINT BASED ON 4BAR MECHANISM FOR AMPUTEES IN THE DEVELOPING WORLD Safa Elamin Mahmoud Hamad, Hanna Gasem Ahmed Abdalla, Mona Elemam Ali Sharf Aldeen, Fatima Galal Ahmed Elsayed, Mohamed Ibrahim Salih Fadul, and Altayeb Mobarak Altayeb Babeker 103: USING OF A LOCAL HERB (CYMBOPOGON SCHOENANTHUS) AS APPROPRATE TECHNOLOGY FOR ENHANCE A HEALTH Salma Mohammed Alameen 135: UNSATURATED FATTY ACID HINDERED PORPHYROMONAS GINGIVALIS PATHOGENICITY FACTORS Sara Ahmed Eltigani, Mohamed Mutasim Eltayeb, and Jiro Arima 131: A COMMUNIYY-ORIENTED MOBILE APPLICATION MODEL FRAMEWORK TO CONTROL PRODUCTS PRICE Mathani Hajali Join the virtual space
3 - 4 *Tea/Coffee
4 - 5	KEYNOTE TALK (VIII) APPROPRIATE TECHNOLOGY MANIFESTO AND TECHNOLOGY POLICY Speaker: John Trimble Moderator: Marcel J. Castro Sitiriche Join Room A
5 - 6 PM	CLOSING SESSION Chair: Gada Kadoda Join Room A

Important Dates

Initial Call for participation

9 August 2021

18 October 2021

Abstract Submission deadline

Submissions of abstracts to the 10th ICAT are now closed.

Notification of Acceptance

8 November 2021

31 January 2022

Full paper Submission Deadline

Note that this deadline has been extended from 10 January 2022

Paper Review and feedback

14 March 2022

25 April 2022

Final Paper Submission

10th International Conference on Appropriate Technology

22-25 November 2022

Download ICAT 10th Abstract Download Conference Call Download conference poster Instructions for Authors Paper & Proposal Template

10th International Conference on Appropriate Technology (10th ICAT)

10th ICAT Proceedings

Registration for the 10th ICAT

10th ICAT Scientific Review Committee

TABLES OF ORGANIZERS & SUPPORT TEAMS

Enhancing Peace and Governance through Appropriate Technology: Reimagining Sustainable Community Wellbeing in an Era of Global Climate Change

Background

10th ICAT Keynote Speakers

Keynote Talk

Featured Workshops

WORKSHOP TITLE : A GLOBAL ETHICS FOR APPROPRIATE TECHNOLOGY

WORKSHOP TITLE : WORKING WITH UNDERREPRESENTED GROUPS TO INFORM TECHNOLOGY GOVERNANCE & POLICYMAKING

WORKSHOP TITLE: ECOLOGICAL APPROACHES TO FOOD SECURITY AND PEACE IN THE SAHEL FROM THE SMALL HOLDER FARMER UP

WORKSHOP TITLE : 3D Printing Fundamentals: Getting Started on Printer Configuration, Troubleshooting, and CAD file to Object Steps

WORKSHOP TITLE: SUSTAINABLE COMPUTING USING THE RASPBERRY PI PLATFORM

WORKSHOP TITLE: COLLABORATIVE DESIGN AND CONSTRUCTION WORKSHOPS BUILD LOCAL CAPACITY IN SOLAR OVENS AND SMALL WIND TURBINES ON SUMBA ISLAND, INDONESIA - USEFUL OUTCOMES FOR AUTONOMOUS RENEWABLE ENERGY GENERATION?

WORKSHOP TITLE : WASH (WATER. SANITATION AND HYGIENE) IN ELFASHER

Conference Programme

DAY 1: Tuesday 22 November [Venue: Faculty of Architecture, University of Khartoum]

DAY 2: Wednesday 23 November [Venue: Ministry of Higher Education and Scientific Research, Khartoum]

DAY 3: Thursday 24 November [Venue: Ministry of Higher Education and Scientific Research, Khartoum]

DAY 4: Friday 25 November [Venue: Ministry of Higher Education and Scientific Research, Khartoum]

Important Dates

SPONSORS

OTHER SPONSORS

MINISTRY OF HIGHER EDUCATION AND SCIENTIFIC RESEARCH, SUDAN

GIBELA RESEARCH CHAIR, TSHWANE UNIVERSITY OF TECHNOLOGY, PRETORIA, SOUTH AFRICA

PARTNERS

Northern California Council of Black Professional Engineers (NCCBPE)

Main Menu